Detroit Diesel Diagnostic Link 8.01 (DDDL 8.01)+Activation Tool(keygen)
I. - Introducing DDDL 8.1 basic features - This application is the electronic tool for
servicing Detroit Diesel?|s EPA07, EPA10, and GHG14 equipped engines (S-60, MBE4000,
MBE900, DD13, DD15, DD16). Note: It is not backward compatible with earlier versions of
Detroit Diesel electronic systems. Those systems will continue to be serviced with DDDL
6.X. The DDEC VI electronics system contains two controllers, the MCM (Motor Control
Module) and the CPC (Common Powertrain Controller). The DDEC10 system includes the MCM, CPC
and ACM
(Aftertreatment Control Module). DDDL 8.10 allows the user to perform the following
standard operations on both engine platforms:
1- Perform Standard Fault Code Operations
2- Links to Traditional and Advanced Troubleshooting Information
3- Read Actual Values
4- Configure and Manage Parameters
5- Perform Service Routines
6- Playback Logs of All Connected Activity
7- Automatic Software Updates from our server
II - Software Enhancements
Windows 8 compatible
Data files (Log, Parameter, XML?Ke.g.) were moved to a new default location for better
Windows 7 support
Detroit Transmission (DT12) troubleshooting is now included in the tool
Fixed MCM auto connect issue
Fixed Chart Instrument update issue
Crash issue resolved when Exporting parameter fileFixed MCM auto connect issue
III. - System Requirements
IMPORTANT NOTE: As the diagnostic and reprogramming software applications have evolved, the
requirements for additional computer storage capacity and memory has increased. Please
review these computer specifications carefully and take any necessary steps to update your
hardware as needed.
Component Minimum
Windows XP, Windows Vista, Windows 7, or Windows 8 (32 & 64 bit)
1.8 Ghz processor
1.0 GB RAM
40 Gigabyte Hard drive with 20 Gigabyte free
32x CD ROM Drive
Monitor and graphics card supporting 1024 x 768 resolution and 16-bit color
1 free USB port
Internet or Mainframe Connection to DDC Server (for updates)
Hardware Adapter Device (One of the following)
. Nexiq MagiKey device with parallel cable
. Nexiq USB-Link with USB cable (Required for Cascadia diagnostics)
* Laptops purchased from Detroit Diesel beginning in August 2006 meet the minimum
specifications. Any purchase prior to this time may need to be upgraded. As of May 1, 2011,
Detroit Diesel discontinued offering the Dell Laptop.
Component Recommended
IntelR Core. 2 Duo, AMD Athlon. 64X2, or equivalent
2.0+ GHz Dual-Core processor
2 GB RAM or more
100 GB hard drive with 20 GB free space
DVD ROM drive
Monitor and graphics card supporting 1280 x 1024 resolution and 32-bit color
Parallel port, three free USB ports
High Speed Internet - Broadband Internet
Hardware
Adapter device (One of the following)
. Nexiq MagiKey device with parallel cable
. Nexiq USB-Link with USB cable (Required for Cascadia diagnostics)
Note: Bluetooth functionality NOT approved at this time
Operating System Windows XP, Windows Vista, Windows 7, or Windows 8 (32 & 64 bit)
IV. - Translator box / cables requirements - Here are some key general points to remember
when connecting to the MCM, ACM and CPC with
DDDL 8.10:
1 - For DDDL 8.10 the only translator box fully validated with Detroit Diesel software
applications is the Nexiq USB Link, which is RP1210A compliant with J1939 and CAN
connectivity. (P/N 125032) Translators that support J-1708 communicationosn ly will not
work with DDDL 8.10 under any circumstances.
2 - All EPA07 vehicles contain a 9-pin Deutsch connector wired to support J-1939/ CAN
communications and J-1708 communications. EPA10 vehicles support J1939/CAN exclusively.
3 - All operations may be carried out on a vehicle that has both the MCM and CPC properly
installedN. ote: There must be a CPC physically present on the vehicle in order for
communications to be established with the MCM.
4 - When plugging into the 9 pin Deutsch connector on the vehicle you mu sutse a mating 9-
pin connector fully wired to support J-1939 / CAN communications. The old style 6 to 9-pin
Deutsch adapter will not work.
5 - Diagnostic adapters that will work with the DDEC VI/DDEC10 system include P/N 405048 (6
and 9-pin ?§Y?¨ adapter) and P/N J-46931, the J1939 9-pin Deutsch Connector that was part
of the DDEC V programming station upgrade kit.
V. - Installing DDDL 8.10
Before installing DDDL 8.10 you must remove any version of Detroit Diesel?|s software to
minimize the chance of any conflicts with older versions of the software. Please use the
Windows Control Panel?|s ?§Add / Remove Software?¨ option to perform this operation.
NEW: With this version, both DDDL 7.10 and DDDL 6.50 installed together and will share the
same registration key
. DDDL 6.50 cannot be used unless DDDL 8.10 is installed and registered on the same
computer.
VI - Updating your DDDL software
1) CD updates:
These will be required for major changes to the program such as changes to the graphical
user interface.
2) Direct Server updates
New CBF files that will allow the user to work with updated levels of ECU software and add
functionality to the tool
New cases for Advanced Diagnostics as they are developed from field experience
These updates are initiated from within the DDDL software application. An internet
connection is required to use this feature.
VI. - Registration / Support - After the first installation of DDDL 8.10/6.50, the user
will have access for a 30-day trial period. During this trial period, the user should
obtain an Access Key. Follow the steps below to get a key:
1) Launch the DDDL Application from your desktop icon
2) The license panel will appear with displaying your computer ID. Each computer ID is
unique to the computer DDDL is loaded on.
NOTE: This computer ID is an example only and cannot be used to register your software.
To register Diagnostic Link 7.10/6.50, contact the Nexiq Support Center a1t -877-974-3539
with 2 pieces of information, the computer ID as shown in the picture immediately above and
the numbered label on the back of the CD caseI. n ternational customers can contact Nexiq
at 1-248-293-8285. The Nexiq Support Center also provides basic support for DDDL 8.10/6.50
relating to installation and connectivity issues.
VII. - DDEC Reports 8.02 - DDEC reports is not installed with any version of Diagnostic
Link, but is available on this CD at no additional charge. This version of DDEC Reports
supportsa ll current production engines platforms . No registration is required. When
viewing the standard trip reports, users will notice that several new terms have been added
that only apply to DDEC VI and DDEC10 equipped vehicles. An updated glossary of terms used
in DDEC Reports can be found in the DDEC Reports help file or by printing out the DDEC
Reports Glossary from the CD menu.
DDEC Reports 8.02 uses both J-1708 and CAN messaging for communicating with the vehicle.
You will connect through the vehicle?|s 9-pin diagnostic connector to extract data. All the
translators that are designated to work with DDDL 8.10 in an earlier section of this
document may be used for DDEC Reports extractions as well.
IMPORTANT NOTE: DDDL 8.10 must be installed and registered in order for DDDL 6.50 to be
operational.
Region: All regions
Languages: English
OS: VISTA, Win7 x32, Win7 x64, Windows 8
Quantity of CD: 1 CD
Date of update: 12/2014
| 
Bank Transfer