new version version for Paccar Electronic Service Analyst ESA 5.2.2.1 software+SW flash files

SA Update Announcement 

2020

Overview 

ESA 5.0.0.411 has been released to Production. This release includes support for P30-1030-114 Rev 2, and P30-1041-013 CECU3 software. It also contains multiple updates with the largest being support for CECU3-500 control units. The update is available for download.
     

Changes Implemented 

New Features:

·         Support for CECU3-500 control units

 Designed for use with the P30-1041-013 software

·         P30-1041-013 NAMUX CECU3-500 software supported

  Required update

   New Features:

 None

   Defect Fixes:

 Databus failure for CECU turns on too quickly when key is in the off position

  Exterior Lighting - Stop Lamps Are Activated After Ignition Is Turned Off

  Starter Motor starts in gear for advantage automated because of parameter setting

·         P30-1030-114 Rev2 NAMUX CECU3 software supported

   Optional Update

  New Features:

None in this revision

Defect Fixes:

 Switched the Brake Vendor Parameter to an internal only parameter.

·         Implemented autobaud connection speed for connecting to control units

·         Upgraded ESA to .NET 4.7 Framework

  Upgrade should resolve UI issues where dialog boxes would be “cut off” due to incompatible screen resolutions.

Defect fixes:

·         Updated Dymo Label Printer template

 Includes support for latest Dymo Printer drivers

·         Fixed known issue restoring parameters for vehicles upgrading from an ICU to CECU3 causing ESA to crash due to Q21-1029 part number.

·         Implemented DM13 Stop and Hold CAN traffic during ESA flashing process to prevent inadvertent fault codes.

·       

Known Issues:

·         The NEXIQ USB-Link 2 has known driver issues. After flashing a CECU3 with a NAMUX 2 software package (P30-1002-XXX, P30-1008-XXX, P30-1017-XXX, P30-1019-XXX, P30-1030-XXX, P30-1032-XXX), attempts to immediately connect post-flashing will likely fail.

    Close ESA and completely disconnect the NEXIQ DLA before attempting to connect if this issue occurs. The second option is to use a NEXIQ USB-Link 1 for the connection.

    NEXIQ is currently working on an updated driver. Current plans are to have a beta version for PACCAR internal use available November 17th,with a release version available at the end of December.

·         JPRO DLA+ 2.0 and DLA+Wireless 2.0 will not detect PACCAR Display 1.0 on 2016 vehicles without the use of a crossover cable; not a significant concern since 2016 vehicles should not have PACCAR Display 1.0 devices installed

Contact Information:

my email: autotruckepc@gmail.com
Skype:  autotruckepc
Web site: www.autotruckepc.com
If you have any problem, please do not hesitate to contact us.

Shipment Note:

If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address